Skip to main content

For a maximum life to your laptop

Laptop is an another formation of a desktop computer. It contains with same peripherals like desktop main differences are size,shape and battery.  If you need a maximum life for your laptop you have to treat it soft.

For a maximum life for your device.
  • Should not cover the air inlet & outlet of the laptop.  It will increase the heat of laptop and damage mother board and gpu. If you are using laptop on the bed both outlets will be covered. I recommended to service the cooling system once every six months.\
  • Do not spared dust and wet on the keyboard. You can clean dust with a small vacuum cleaner.
  • Are you a gamer ? Then use an external USB Keyboard and Mouse.
  • Do not use power outlets with lose connection. This will damage your power adapter and mother board peripherals.
  • Are you using Ethernet cable for internet and networking ? then unplug the cable after using.
  • Are you going to not using laptop for a long period then charge the battery 100% and remove it till next time use. 
  • Do not push the screen with fingers or other things. It will damage your LCD or LED.
  • Do not touch the lens in the optical drive.while the tray open. 




Comments

Post a Comment

Popular posts from this blog

Why don't you buy an all-in-one computer - 06 Reasons

01. Limited Upgradeability Most all-in-one computers are designed to be compact and sleek, which often means that there is limited space for internal components. This can make it difficult or even impossible to upgrade hardware such as the graphics card or CPU. 02. Limited Portability All-in-one computers are not as portable as laptops because they are typically larger and heavier. They also usually require a power source, which can make them less convenient to use on the go. 03.  Higher Cost All-in-one computers are often more expensive than traditional desktop computers or laptops with similar specifications, largely due to their compact and integrated design. 04.  Limited Screen Size Options Because the screen is built into the computer, there are usually limited size options available. This can be a disadvantage for users who prefer larger or smaller screens. 05. Limited Flexibility All-in-one computers are often designed to be used as a complete system, which ...
Post a Comment
Read more

How to reduce laptop temperature

01. Keep the laptop on a hard surface: Place the laptop on a hard surface like a desk or a table to ensure that the airflow is not restricted. Avoid placing the laptop on soft surfaces like a bed or a sofa as they can block the airflow and cause overheating 02. Use a laptop cooling pad: Laptop cooling pads are designed to improve airflow and reduce heat buildup. They come in various sizes and designs and can be easily attached to the laptop's bottom. 03. Clean the air vents: Over time, the air vents on the laptop can get clogged with dust and debris, restricting airflow and causing overheating. Use a can of compressed air to blow out any dust or debris from the vents. 04. Avoid running too many programs simultaneously: Running too many programs simultaneously can cause the laptop to work harder, generating more heat. Try to close any programs that are not in use. 05. Adjust power settings: Adjust the power settings of the laptop to reduce the workload on the system.
Post a Comment
Read more

Master Boot Record (MBR)

The Master Boot Record (MBR) is a small but essential section of a hard drive that is responsible for booting up an operating system. It is located at the very beginning of the hard drive and contains information about the partition table and boot loader. The MBR consists of three parts: Boot loader code The boot loader code is the first piece of code that is executed when the computer boots up, and it is responsible for finding and loading the operating system. Disk signature Disk signature is a unique identifier that is used to differentiate between different hard drives. Partition table Partition table contains information about the layout of the hard drive, including the size and location of each partition. When a computer boots up, the BIOS (Basic Input/Output System) reads the MBR from the hard drive and loads the boot loader code into memory. The boot loader code then searches for the active partition and loads the operating system from that partition into memory. The MBR is a c...
Post a Comment
Read more