Skip to main content

Why don't you buy an all-in-one computer - 06 Reasons

01. Limited Upgradeability

Most all-in-one computers are designed to be compact and sleek, which often means that there is limited space for internal components. This can make it difficult or even impossible to upgrade hardware such as the graphics card or CPU.

02. Limited Portability

All-in-one computers are not as portable as laptops because they are typically larger and heavier. They also usually require a power source, which can make them less convenient to use on the go.

03. Higher Cost

All-in-one computers are often more expensive than traditional desktop computers or laptops with similar specifications, largely due to their compact and integrated design.

04. Limited Screen Size Options

Because the screen is built into the computer, there are usually limited size options available. This can be a disadvantage for users who prefer larger or smaller screens.

05. Limited Flexibility

All-in-one computers are often designed to be used as a complete system, which means that they may not be compatible with other hardware or peripherals. This can limit the user's flexibility in terms of customization and compatibility with other devices.

06. Limited Reparability

All-in-one computers are often difficult to repair or upgrade because they are designed to be compact and integrated. If a component fails, it may be necessary to replace the entire computer rather than just the faulty part.

Comments

Post a Comment

Popular posts from this blog

WIFI adapter not showing in the windows device manager why ?

First Reason :-  First you should go to the BIOS program and check the status of the wifi adapter. If wifi adapter disabled form the BIOS device manager will not show the wifi adapter. If it is disabled. Enable it and boot the Laptop.   Second Reason :- This can be a Hardware Faulty. Open the laptop cover and find the PCI wifi adapter then replace with a same adapter.( This work is need a some technical skill. If you do not have it. Hand over to the laptop repair tech guy or you can use an USB wifi adapater )
Post a Comment
Read more

How to fix no display on monitor

When you turned on your desktop then  monitor says no display or no signal massages. Follow the undermentioned instruction for the troubleshoot. First you check the monitor and VGA cable with a another computer. If the error massages displayed replace the faulty VGA cable or Monitor.  Open the CPU cover  If you have a Graphic Card remove it clean gold pins and reinsert then try  Remove the Graphic Card and clear the CMOS then try with on board VGA Clear  the CMOS and check the CMOS battery has any damages. Remove RAM cards and clean the gold pins with an eraser. then plug them and power on the computer. If you have more than one RAM card insert them one by one and boot the computer. If you have only one RAM card then try to boot the computer with an another working RAM from outside computer. Unplug the power supply unit then connect it to the AC and make sure your psu provides the correct 12V and 5V. You can check this by a power...
Post a Comment
Read more